XY-SK80 DC-DC 80W 5.1A Adjustable Automatic Buck Boost Power Supply Module CC CV Step Up Down Voltage Converter Solar Charging Module

 XY-SK80 is a DC adjustable constant voltage constant current automatic buck-boost power supply module with LCD display.HD display input voltage and output voltage, current, power, display status, capacity, energy and time.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.

It supports solar charging and can be connected to solar battery.

    1>.High quality heat sink

    2>.Multiple parameters are displayed simultaneous

    3>.Enabled/disabled output

    4>.Automatic buck/boost voltage

    5>.Constant voltage constant current output

    6>.Solar charging

    7>.Lock output current

    8>.Support anti-reverse protection

    9>.Support anti-backflow protection

    10>.Support output short circuit protection

    11>.Support over-voltage protection

    12>.Support over-current protection

    13>.Support over power protection

    14>.Support over temperature protection

    15>.Support display input voltage

    16>.Support display output voltage, current, power

    17>.Support working status indicator

Working Voltage:DC 6.0V~36V

Output Voltage:DC 0.6V~36V

Output Current:0.0A~5.1A

Output Power:80W

Voltage Display Precision:0.5%

Voltage Display Resolution:0.01V

Current Display Precision:0.5%

Current Display Resolution:0.001A

Conversion efficiency:About 88%

Anti-reverse Protection:Yes

Anti-backflow Protection:Yes

Short Circuit Protection:Yes

Work frequency:180KHz

Over-temperature Protection:100℃

Working Temperature range:-20℃~100℃

Working Humidity range:0%-95%RH

Size:79x43x53mm

1. Input undervoltage protection voltage is 4.7V. Module need re-power if input less than 4.7V.

2. It is a DC power module,So it can not connect to AC power.

3. Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.

4. ’VIN-’ and ‘OUT-’ can not be connect together.Otherwise module can not support constant current output.

5. Keep input more than 15V if need XY-SK80 output in maximum power.

6. Please make sure input power is more than load power.

7. Please step down output power if module is hot.

8. Please read use manual and description before use.

Ordinary power supply

Battery charger

LED drive power

Instrument voltage display

Test meter

Circuit test

Power conversion

1 x XY-SK80 Step UP Down Power Supply Module